How to Make Helmet Cheek Pads Thinner?

In recent years, helmets have become a very important part of our daily lives. They are worn by athletes, soldiers, police officers, firefighters, construction workers, etc. The reason why they are so important is that they prevent serious injuries from occurring.

In this article, you will know how to make cheek pads thinner but you have to read it carefully and follow the steps shown below.

How Do Helmet Cheek Pads Work?

Helmet cheek pads are a great way to protect your face from the impact of an accident. They’re also a great way to make sure you don’t get hit in the first place, as they can help prevent head and neck injuries.

There are two types of helmet cheek protectors: those made out of foam or those made out of plastic. Foam cheek protectors are usually cozier than plastic ones, but they tend to be less durable.

Plastic cheek pads in motorcycle helmets are much more durable than foam ones, but they’re not always as comfortable.

The best thing about helmet cheek pads is that they’re relatively inexpensive. You can buy them at any sporting goods store for around $5-10.

However, if you want to save money on these pads, you should try making them yourself. Making your helmet cheek pads will allow you to customize them to fit your needs perfectly. It’s also a lot cheaper than buying them.

What If Your Helmet Is Too Tight?

It’s possible that your helmet is too tight. It is because of the bigger size of the helmet’s cheek pads. This can cause pressure points on your head, neck, and shoulders. To relieve this pressure, loosen the straps or remove them altogether. Also, make sure that your helmet fits properly so that it doesn’t rub against your skin.

How To Make A Tight Motorcycle Helmet Fit Better?

A helmet lying on a motorcycle

Helmets cheek pads are usually made of foam or rubber. If you want to make them thinner, you should try using a heat gun. A heat gun can melt the material and let you cut off pieces of the padding. You will need a pair of scissors to trim it down. in this article, we will show you how to do it.

Steps To Making Thin Helmet Cheek Pads:

Take Your Helmet Out Of Its Case

Taking off your new helmet from its case is easy, just remove the strap and then pull it away from the helmet.

Remove The Pad From The Inside Of The Helmet

Once you remove the helmet from its case, take a look at the inside of the helmet. There is a pad on the inside of the helmet which is called a helmet cheek pad. It is also known as a chin protector. Remove the helmet cheek pad from the inside of your helmet.

Cut Off The Excess Padding

If the size of cheek pads is big, you need to cut off the extra padding around the helmet cheek pad. Take a pair of scissors and cut off the excess padding.

Use A Heat Gun To Melt The Helmet Cheek Pad

Now you need to use a heat gun to melt some parts of the helmet cheek pad. This process will help you to get rid of the hard plastic layer. Once you melted the helmet cheek pad, you can easily cut it into smaller pieces with a pair of scissors.

Put The Helmet Back Together Again

When you finish melting the helmet cheek pad, put it back into the helmet. Then, reattach the strap to the helmet. Now you can wear your new helmet cheek pad with a snug fit.

Repeat Steps 1-5 

If you want to make more than one helmet cheek pad, repeat these steps for each helmet pad. When you finish making all the helmet cheek pads, put them back into their cases.

Enjoy Your New Thin Helmet Cheek Pads!

This method works well if you want to make thinner cheek pads.

Also Read: Top 11 Best Supermoto Helmet In 2022

Conclusion

Customization of your helmet cheek pads is very simple. All you have to do is to follow the above instructions. After you finish making your own helmet pads, you can enjoy wearing them without having to worry about getting hurt by the hard plastic part of the helmet cheek pad anymore.

FAQs

How to Check Helmet Size?

The first step in checking the size of your helmet is to measure the circumference of your head. Measure around the crown of your head where the helmet sits. Next, measure the distance between the top edge of the helmet and the bottom edge of the helmet. These two measurements should be equal. If they are not, adjust the helmet until they are.

Right-size helmets are very important because they tend to safeguard you from crashes and discomfort.

Should A Motorcycle Helmet Squeeze Your Cheeks?

Yes, it should! When riding a motorcycle long distance, your head will be exposed to extreme forces. This can cause serious injuries if your helmet doesn’t fit properly. The best way to prevent these injuries is to wear a quality motorcycle helmet.

How Tight Should Cheek Pads Be?

The tightness of cheek pads depends on how much muscle mass you have. If you have more muscle mass, then you should wear tighter cheek pads than if you are leaner.

Wearing A Helmet Without Cheek Pads?

Helmet manufacturers built cheek pads by default in helmets but wearing a helmet without cheek pads can be dangerous if you are riding a motorcycle. If you’re wearing a helmet with no cheek pads, it may cause you to lose control of your head. You could end up crashing into something or falling off your bike.

Arshad
Bikes and bike accessories are my passion, and I love sharing everything I learn about them. Whether you're looking for information about your bike, its accessories, or anything else, Helmets Life is the ultimate resource.